Thursday, June 23, 2011

Building DCE firmware

Now, thanks to public release of codec libraries, and after some slacking on my part, all the bits and pieces needed to build your very own ducati (cortex-m3) firmware are available. I've put together a wiki page with instructions of where to find all the pieces, and how to build, for 2.6.38 kernel:

This is using syslink-2.0, tiler-2.0, and GA codecs/FC/etc.. but now at least, if you want to use a kernel with a different version of syslink, you can rebuild the firmware with appropriate corresponding bios-syslink on the coprocessor side.